Millwright examination – Starting in January 2027

Millwright examination – Starting in January 2027

The examination lasts three hours. The examination is composed of 60 questions, each of which is worth 1 point. The passing mark required is 60%. The materials provided to you for taking the examination include a scientific calculator, a pencil, an eraser, an ordinary transparent ruler, and a blank sheet. No other materials or reference documents are allowed during the examination.

Skill Content on Which Questions May Be Based

Section 1 – PREPARING AND INSTALLING MACHINERY

PREPARATION FOR WORK ON CONSTRUCTION MACHINERY

  • Plan the work to do. (*)
    • Review the work to be done.
    • Gather relevant information on the different types of plans, specifications, and drawings.
  • Apply the appropriate security measures. (*)
    • Identify and eliminate the different risks.
    • Apply the prevention standards in force.
    • Perform work at heights safely.
  • Lift and handle equipment and machinery. (*)
    • Plan the lifting or handling and take the necessary safety measures.
    • Handle, secure, lift, and move the load.

INSTALLATION OF MACHINERY

  • Install the base, footings, and anchors.
    • Establish the layout of the machinery to install.
    • Prepare, position, and attach the base and the footings before receiving the equipment.
  • Install the equipment.
    • Place the machinery and attach the equipment in compliance with installation requirements.
    • Complete installation of the machinery.
  • Prepare the machinery for start-up. (*)
    • Perform verifications, no-load tests, and pre-operational tests.
    • Make adjustments at start-up.

Section 2 – REPAIRING AND MODIFYING MACHINERY

REPAIRING MACHINERY

  • Detect operating problems (malfunctions).
    • Diagnose a failure, its probable causes, and the urgency of the intervention.
  • Fabricate/adapt the parts and accessories needed for the work. (*)
    • Identify the need to fabricate or adapt templates, parts, and accessories needed for the work.
    • Fabricate and install replacement parts.
  • Carry out machinery repairs.
    • Repair or replace the defective components.

MODIFYING MACHINERY

  • Proceed with modifications to machinery.
    • Add or replace components.
    • Complete the work and ensure the quality of the modification.
    • Verify operation and compliance.

Section 3 – PERFORM MAINTENANCE OF MACHINERY (ROUTINE AND PREVENTIVE)

  • Carry out maintenance work (routine and preventive).
    • Inspect the general condition of the machinery.
    • Maintain and recondition mechanical systems.
    • Optimize machinery performance, document interventions, and recommend improvements.

Samples of questions for provincial qualification examination .

Suggested Documentation

The suggested documents are an important tool to help you prepare for the examination. However, your best asset to write the exam successfully is the quality and diversity of the skills you have acquired during your apprenticeship.

  • BASARABA, Bruce M. IPT’s Rotating Equipment Handbook: Machinery Reliability & Condition Monitoring. Edmonton: IPT Publishing, 1995, 500 p.
  • CONSTRUCTION SAFETY ASSOCIATION OF ONTARIO. Hoisting and Rigging Safety Manual. Etobicoke, Ont.: CSAO, 2009, 168 p.
  • DAVIS, Thomas Bieber. Mécanique industrielle et maintenance. Repentigny: Éditions Reynald Goulet, 2009, 489 p. (Available in French only.)
  • OBERG, Erik. Machinery’s Handbook, 28th ed. New York: Industrial Press, 2008, 2692 p.
  • RÉMY, François. Éléments et organes de machines. Montréal: Éditions du renouveau pédagogique, 1983, 153 p. (Available in French only.)